Talk to everyone about the maintenance plan for the high-speed circular saw.

　　Let me talk about it.High-speed circular saw.Maintenance plan.

　　Daily maintenance plan for high-speed circular saws.

　　During the use of high-speed circular saws, various problems may arise, some of which are common in daily life. Learning to handle these issues will speed up the use of high-speed circular saws in enterprises, saving unnecessary time and costs.

　　Here are some basic common sense questions and their cleaning plans:

　　Question 1: The circular saw blade suddenly stops working or the equipment stops moving:

　　Treatment plan:

　　In most cases, it is an electrical circuit problem. Immediately cut off the power, check the circuit, check if the voltage is stable, if the power supply is normal, if the ground wire is connected properly, and if there is a voltage meter nearby. Check if the saw blade is stuck or if other parts should be checked together; if there is a problem with the equipment itself, personnel need to check.

　　Question 2: The operator operates the equipment with a loud noise.

　　Possible causes are bearings, such as wheel eccentricity, damage, gear damage, etc. This kind of hardware damage should contact the supplier to stop maintenance or replace.

　　Question 3:High-speed circular saw.There is a lot of vibration from time to time.

　　First, check if the equipment is floating up and down or uneven, check if the equipment bearings are defective, if the casing is intact, if the equipment grinding wheel is eccentric, etc. Then check if the gears are intact, if the bearing seat is worn; if the problem still cannot be solved, please contact the manufacturer immediately and stop handling.

　　Question 4: Wear of the casing of the high-speed electric circular saw.

　　When purchasing equipment, the company should carefully check the integrity of the equipment. If damage or wear of the maintenance casing is found during use, this possibility is often ignored by humans, such as employees not caring about the equipment and usage time. If the time is too long, the temperature during use will be too high, causing ablation and excessive wear. Please contact the manufacturer for changes.

　　Question 5: The metal circular saw machine produces smoke.

　　This phenomenon usually indicates that the equipment is entering the aging stage, which is inevitable. However, if the equipment is purchased soon, it is likely that maintenance will not stop for a long time. If the company does not care about the cleaning and hygiene of the equipment and does not have reasonable non-continuous usage breaks; there may also be aging of equipment parts or the metal circular saw blade reaching its service life, requiring replacement. When this happens, please stop the equipment immediately, carefully troubleshoot, then turn it back on, and resolve the issue.

　　Question 6: The machine tool equipment has a special smell.

　　If the operator finds an unusual smell from the equipment while working, they should stop the equipment and cut off the power. This may be due to circuit problems, system inspection of the equipment, or high-temperature phenomena caused by excessive fatigue of the equipment. If you cannot find the situation, you should ask someone to repair it.

　　That's all for today, thank you all for watching.