Precautions for Operating CNC Pipe Cutting Machine

CNC Pipe Cutting MachineWith its wide applications and various advantageous features, it is a very popular product in the market. However, there are many knowledge points that need to be understood when using it, as many users are still unaware of these. Next, I will introduce the operating precautions for CNC pipe cutting machines. If you are interested, feel free to read on.

The CNC pipe cutting machine can cut approximately 15-20 times per minute. Generally, within this speed range, the surface of the workpiece will not be damaged. If burrs are found on the workpiece surface, check if the cutting speed is too fast. In fact, the CNC pipe cutting machine can achieve fully automatic functions, automatic feeding, automatic counting, etc. If you are unsure when to replace the saw blade, you can check the square of the count to ensure the saw blade is effective; do not use the same saw blade for an extended period. Replace it after a certain time of use, otherwise, it will severely affect the sharpening and secondary use of the saw blade. In addition, to ensure that the workpiece is not damaged (such as deformation, uneven surface, etc.), the total pressure of the equipment, front pressure, rear pressure, and other pressures can be infinitely adjusted. The cutting tolerance of the workpiece is generally: plus or minus 0.03 millimeters. Therefore, according toCNC Pipe Cutting Machinethe different models, the fixture can generally clamp 1-28 pipes at a time (also related to the diameter of the pipes).

Before starting the CNC pipe cutting machine, be sure to check if the saw blade is normal, such as whether it is installed properly, whether there are cracks in the saw blade, and whether there are missing teeth. Generally, the clamping length of the CNC pipe cutting machine should not be less than 50mm, and the stop block should be fixed and not loose. Alternatively, after starting the machine, check if it is idling. Here, tests for clamping, loosening, moving forward, and moving backward are also required; only after confirming there are no issues can formal operations begin. Especially for the automatic pipe cutting machine's rear door, it should be opened before each work session to check the tightness of the V-belt, which should neither be too loose nor too tight. All parts such as the drive chain, sprocket, worm gear, screw rod, and guide rail should be lubricated with mechanical lubricants. After powering on, if you must press the main machine button, please check if the rotation direction indicated by the arrow is correct; otherwise, pressing the spindle will cause it to fly out, and the fast forward and rewind switch may malfunction, causing damage.CNC Pipe Cutting MachineWhen the cutting tool of the equipment moves to the rear of the terminal, before turning off the water supply, the blade must be completely away from the test piece, and then the sealed door can be opened to remove the test piece. Diamond tools are valuable items, so when clamping rocks, try to avoid impacts to prevent blade deformation, which affects cutting quality. Of course, during normal cutting, do not press the fast forward button of the automatic pipe cutting machine. Otherwise, rapid feeding will damage the blade and the machine.

The above content is what I have shared with friends regarding the operating precautions for this CNC pipe cutting machine. More knowledge points about CNC pipe cutting machines will continue to be updated in the next issue, so remember to pay more attention to the website to not miss out on exciting content. Everyone is welcome to order products that suit them here.