Six Reasons for High-Speed Circular Saw Machines

High-Speed Circular SawIt has advantages such as simple structure, high efficiency, and wide application. It is one of the basic equipment for wood processing. The rebound or loss of the circular saw blade too quickly is a common problem in many enterprises and is very troublesome. So what are the reasons for the breakage of high-speed circular saws?

Six Reasons for High-Speed Circular Saws:

1. If the ammeter is not set correctly, the saw blade will be damaged, and the machine will also be damaged.

2. InstallationHigh-Speed Circular SawWhen installing the saw blade, it should also be installed correctly and checked multiple times. Improper installation will not only damage the metal circular saw blade but also affect the lifespan of the circular saw.

3. The cutting speed is related to the cutting material. The cutting speed for different materials should be adjusted in a timely manner according to requirements. Many enterprises blindly adjust the cutting speed for quick cutting, leading to damage to the metal circular saw blade, which is also a fundamental reason for blade damage.

4. The saw blade of the high-speed circular saw should be handled carefully to avoid accidentally hitting the ground, which makes the surface of the circular saw blade not smooth enough.

5. Some enterprises cut dirty materials. The materials are usually sent directly to the machine for cutting without being cleaned first. This is a mistaken perception because there is a lot of dust, iron filings, and even dirt on the materials, which can cause significant friction on the metal circular saw blade during the cutting process. Of course, the friction causes the saw blade of the high-speed circular saw to wear out too quickly.

6. To speed up production, enterprises may work more than 12 hours a day, even 24 hours. In this case, the load on the circular saw blade during cutting will increase, and the circular saw blade cannot buffer, making excessive wear inevitable.

High-speed circular saws are used for winding, unwinding, starting, braking, tension control, loading, etc. The above applications are completed by the torque of the magnetic powder brake and magnetic powder clutch. Whether the magnetic powder brake can start and operate normally is related to torque. The magnetic powder brake generates torque when an object is subjected to tangential force in the direction of rotation, known as torque.

As an ideal automatic transmission component, the magnetic powder brake and magnetic powder clutch of high-speed circular saws are the choice in the field of industrial machinery. The magnetic powder brake and magnetic powder clutch have good linearity, and the torque is proportional to the excitation current over a wide range, which can serve as linear adjustment components. The magnetic powder brake and magnetic powder clutch are used for parking and utilize the smooth characteristics and constant torque characteristics during the connection process to achieve buffered starting and stopping.

The manual tension controller is specially designed forHigh-Speed Circular Sawthe torque output of the magnetic powder brake. Closed-loop current control ensures that the output current is not affected by tension changes, the environment, or the temperature of the magnetic powder brake/clutch coil, with high output power and short-circuit protection.